Sustainability & Energy Certifications at Teknor Apex (EU operations)
Our European sites hold third-party certifications that verify recycled-content traceability (RecyClass), mass-balance attributed circular/bio-attributed materials (ISCC PLUS), energy management (ISO 50001), KOMO® product conformity for TPE pipe seals, and the purchase of renewable electricity backed by Guarantees of Origin. Each claim below is tied to a certificate, scope, site and date.
RecyClass Certified Products: Sarlink® and Monprene® with Recycled Content
The RecyClass Certification confirms that specific Teknor Apex materials are compatible with established European recycling streams and meet recyclability requirements verified by independent auditors.
This certification ensures that our products:
Are engineered for recyclability within existing plastics recovery systems.
Comply with European recyclability protocols (as defined by Plastics Recyclers Europe).
Support closed-loop production and reduce plastic waste through circular design.
Are validated for polymer compatibility, colorant suitability, and processing behavior during recycling.
By incorporating RecyClass-certified compounds, Teknor Apex helps customers meet Ecodesign and Extended Producer Responsibility (EPR) goals while promoting sustainable product development
The ISCC PLUS (International Sustainability & Carbon Certification) confirms that Teknor Apex uses responsibly sourced raw materials that contribute to carbon reduction, circular feedstocks, and bio-based innovation.
Under ISCC PLUS certification, Teknor Apex demonstrates:
Full traceability of sustainable and renewable feedstocks across the supply chain.
Integration of mass-balance principles, enabling verified circular and bio-attributed materials.
Compliance with EU and global sustainability standards for polymer production.
Support for customers pursuing Scope 3 emission reduction and ESG compliance.
This certification enables Teknor Apex to supply verified sustainable compounds that help manufacturers transition from fossil-based polymers to low-carbon, circular alternatives without sacrificing performance.
In Europe, we are striving to Building a Circular Future
Together, RecyClass and ISCC PLUS certifications reinforce Teknor Apex’s mission to create materials that are responsible by design — reducing waste, increasing recyclability, and supporting customers’ sustainability commitments across global markets.
Kiwa has issued KOMO® product certificates to Teknor Apex for TPE pipe joint seal materials used in non-pressure wastewater and drainage applications. These certificates confirm that the quality system and product characteristics are periodically audited and meet the technical requirements of BRL 2020-1, which in turn covers the material requirements of EN 681-2 for thermoplastic elastomer seals.
Certificate facts at a glance:
Certificate K41340/06 — Teknor Apex B.V. (Geleen, NL)
Certificate 109169/01 — Teknor Apex Elastomers (Leominster, MA, USA)
Standards & material specification
Guideline/BRL 2020-1 applies and references EN 681-2 (Elastomeric seals—Material requirements for pipe joint seals—Part 2: Thermoplastic elastomers).
Certified TPE material listed: Sarlink® 9156B, nominal hardness 60 IRHD (see technical specification, page 2 of each certificate)
Why this matters
Compliance confidence: Independent Kiwa verification against BRL 2020-1 / EN 681-2 demonstrates material fitness for wastewater & drainage seals.
Consistent quality: Certificates explicitly state periodic control of both the quality system and the product.
Global availability: Certificate coverage includes EU production (Genk, Belgium) supporting European projects and standards alignments.
This certification ensures that Teknor Apex materials meet the stringent health and safety standards required for products that come into contact with drinking water. It demonstrates our ongoing commitment to public health, material integrity, and regulatory compliance across all water-related application.
NSF/ANSI/CAN 61 is the internationally recognized benchmark for evaluating materials and components that contact drinking water. It ensures that products do not contribute harmful contaminants to potable water systems.
The certification covers:
Pipes, seals, joints, and plumbing devices used in water distribution and treatment systems.
Testing for chemical leachate and toxicological safety of all wetted components.
Independent laboratory verification through an ISO/IEC 17025 accredited facility, audited by IAPMO
Teknor Apex Company has achieved official certification from IAPMO Research and Testing, Inc. for its Sarlink® thermoplastic elastomer (TPE) compounds, confirming full compliance with NSF/ANSI/CAN 61:2020 – Drinking Water System Components, Health Effects.
Applications for Certified Sarlink® TPE Compounds
The certified Sarlink® grades are ideally suited for:
Drinking water tubing and seals
Faucet and plumbing components
Potable water distribution systems
Water treatment and filtration components
Valves, gaskets, and flexible connectors
By integrating these certifications — ISO 50001, MVV Energie Green Electricity, and Eneco Belgium Renewable Energy — Teknor Apex is advancing toward a net-zero, energy-efficient future.
We continue to invest in renewable sourcing, energy optimization, and eco-efficient technologies that reduce our environmental footprint while maintaining exceptional product performance.
Certified by: SKZ-Cert GmbH, Würzburg, Germany
Valid from: 20 January 2025 – 11 February 2027
Teknor Apex Germany GmbH has successfully implemented an Energy Management System (EnMS) according to ISO 50001:2018.
The certification covers the development, distribution, and production of thermoplastic elastomers (TPE) and technical plastic compounds (ETP) at our Rothenburg ob der Tauber facility.
This standard ensures:
Continuous monitoring and optimization of energy use across all operations.
Data-driven efficiency improvements and carbon-reduction strategies.
A structured framework for achieving measurable sustainability performance.
Our EnMS applies to all energy quantities consumed by the company and is verified through independent audits to maintain full compliance and transparency
Certified by: Eneco Belgium nv
Valid for: 2023
Facility: Envalior Specialty Compounds, Genk (Belgium)
Eneco Belgium has confirmed that Envalior Specialty Compounds, part of the Teknor Apex family, operates on 100 % renewable electricity produced in Belgium.
This initiative reduces CO₂ emissions by approximately 19,181 tons annually, contributing significantly to Belgium’s sustainable energy transition.
Key metrics:
Renewable electricity share: 100 %
Expected annual consumption: 43,600 MWh
Estimated CO₂ savings: 19,181.82 tons per year
This certification further strengthens Teknor Apex’s position as a carbon-responsible manufacturer committed to renewable power and local energy sourcing.
Certified by: MVV Energie AG, Mannheim, Germany
Certified volumes: 6,800 MWh (2024) and 6,515 MWh (2025)
Teknor Apex has been awarded the Green Electricity Supply Certificate by MVV Energie AG for purchasing 100 % renewable electricity through its Easy Green program.
All power is generated from certified renewable sources and verified via Guarantees of Origin compliant with EU Directive 2009/28/EC.
Key features of this certification include:
100 % renewable origin — zero fossil-fuel content.
0 g CO₂/kWh emissions at generation.
Full traceability through TÜV SÜD-certified “Green-book Management” systems.
No double marketing of certificates throughout the value chain.
This partnership ensures that Teknor Apex’s European manufacturing operations are powered entirely by clean, renewable electricity
At Teknor Apex, sustainability is more than a goal — it’s a core principle that guides our material innovation, production practices, and global operations. Our sustainability certifications validate our ongoing commitment to responsible manufacturing, environmental stewardship, and the creation of circular polymer solutions. Teknor Apex operates under globally recognized standards for quality, safety, and environmental management.
The Vantage Vinyl™ initiative is a rigorous, third-party verified sustainability program that ensures certified companies uphold the highest standards in environmental performance, social responsibility, and governance (ESG) across the vinyl value chain, that aligns with the United Nations Sustainable Development Goals.
Teknor Apex Commitment to Responsible PVC Manufacturing
Teknor Apex has met all Vantage Vinyl™ certification requirements, demonstrating its commitment to environmental stewardship, social responsibility, and sustainable vinyl manufacturing practices.
Why Vantage Vinyl™ Certification Matters
The Vantage Vinyl™ mark allows customers, partners, and stakeholders to identify companies that are actively advancing the circular economy for vinyl materials.
Teknor Apex’s certification demonstrates:
Verified commitment to sustainable development in PVC production.
Continuous improvement in environmental performance and ESG accountability.
Collaboration across the entire vinyl value chain to promote innovation and transparency.
Partner with a certified, responsible vinyl manufacturer.
Contact Teknor Apex to learn more about our Vantage Vinyl™ certification and our full portfolio of sustainable PVC and flexible vinyl compounds.
Share: