Skip to main content

New Nylon 6/6 Compound Provides Outstanding Low-Temperature Toughness for a Wide Range of Injection Molded Applications

At -40 °C, Chemlon® 109 HBK778 from Teknor Apex Provides 50% Greater Toughness than a Standard High-Impact Nylon 6/6 for Automotive and Other Industrial Parts

PAWTUCKET, RI, U.S.A.—Teknor Apex Company has increased the low-temperature impact strength of a standard toughened nylon 6/6 compound, providing enhanced cold-weather performance for injection molded applications as diverse as fasteners, fuel can nozzles, cable ties, living hinges, and sports equipment.

New Chemlon® 109 HBK778 exhibits 50% greater notched Izod impact strength at -40 °C than the company’s standard Chemlon 109 product, a toughened nylon 6/6 compound. At -10 °C, it still provides nearly as much impact resistance as it exhibits at room temperature, whereas that of standard Chemlon 109 has fallen by 75%.  

Among the key physical properties of Chemlon 109 HBK778 are notched Izod impact strength of 18 kJ/m2 at – 40 deg. C., and flexural strength of 52 MPa.

Good flow properties make Chemlon 109 HBK778 suitable for intricate parts such as clips and fasteners, where the flexural strength of the material enables it to withstand the stresses of assembly and end use.

“Aside from its outstanding low-temperature toughness, Chemlon 109 HBK778 provides physical properties comparable to those of standard Chemlon 109, which has been used successfully in many applications and has received automotive specifications from Chrysler, Ford, and General Motors,” said Michael Roberts, vice president of the Nylon Division of Teknor Apex. “Teknor Apex is prepared to supply this new product worldwide.”

Featured Resources

Need a recommendation?

We're here to help. Tell us a bit about your needs and a friendly expert will reach out to discuss personalized recommendations.

Request an SDS

Get the safety information you need easily. All our products have Safety Data Sheets (SDS) available. Simply fill out our quick form to request an SDS for any product.